12/24 V to 230 V inverter · Van, Car
VotronicLade-Wandler VCC 1212-50 CI (art. 3361)
The VCC 1212-50 CI raises the current to 50 A in a 165 x 149 x 74 mm case (0.95 kg): for recharging a large battery faster while driving.
This version of the site contains no partner or merchant links for now.
In brief
- Weight
- 0.95 kg
- Outputs
- 12 V input (10.5-16.5 V) ; 12 V output, charging current up to 50 A ; without galvanic isolation ; CI bus ; compatible with Euro 6 alternators
- Dimensions
- 165 x 149 x 74 mm
Description
From the same family as the 30 A, this model delivers up to 50 A from a 12 V input (10.5-16.5 V), with Euro 6 compatibility, lead-acid and LiFePO4 programmes and a temperature sensor according to the brochure. It measures 165 x 149 x 74 mm and weighs 0.95 kg.
With 50 A, a large-capacity battery recharges faster during the journey, provided the alternator can supply the current. The wiring must then be thick and protected by a properly sized fuse.
Like the VCC 1212-30 CI, it is not galvanically isolated. At this current, the Renogy DCC50S also offers 50 A with the addition of an MPPT solar input.
Who it is for
- Vans fitted with a large-capacity battery
- Long journeys and recharging while driving
- Installations that want to stay within the Votronic range
Strengths and points to watch
Strengths
- Charging current of up to 50 A
- Lead-acid and LiFePO4 programmes
- Temperature sensor supplied
- Stated weight: 0.95 kg
Points to watch
- No galvanic isolation
- High-current wiring and fuses
These points draw on the manufacturer's specifications and documentation. Solanomad does not test equipment.
Full specifications
| Weight | 0.95 kg |
|---|---|
| Outputs | 12 V input (10.5-16.5 V) ; 12 V output, charging current up to 50 A ; without galvanic isolation ; CI bus ; compatible with Euro 6 alternators |
| Dimensions | 165 x 149 x 74 mm |
Values published by the manufacturer (see the sources), checked on 21 November 2026. A missing specification was not found on the official data sheet.
Compatibility
- Check the maximum charging current accepted by your battery.
Installation and safety
- 50 A wiring, fuses and connection to the alternator: a professional is mandatory.
- Respect the cable cross-sections given in the manual.
Please note. This page guarantees neither the safety nor the compliance of the product or of its installation. For 230 V, high currents or a fixed installation in a vehicle, call a professional and follow the manufacturer's instructions.
Frequently asked questions
What about recharging from the sun too?
This model does not do that. The Renogy DCC50S adds a solar input.
Comparable products


Read before you buy
Sources
- https://www.votronic.de/download/103/produktbroschueren/20020/broschuere-dcdc-ladewandler2025_low.pdf
- https://www.votronic.de/lade-wandler-b-2-b/
Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now. This changes neither the specifications shown nor their order. Learn more.