12/24 V to 230 V inverter · Van

Victron Energy

Phoenix Inverter 12/800 VE.Direct

A Phoenix inverter of 800 VA, 650 W continuous at 25 °C and 1500 W peak, with a stated efficiency of 90%. It targets small occasional 230 V needs on a 12 V battery: chargers, a computer, light tools.

This version of the site contains no partner or merchant links for now.

In brief

Output power
650 W
Peak power
1,500 W
Outputs
230 V 50 Hz output ; 800 VA nominal, 650 W at 25 °C (560 W at 40 °C) ; 9.2-17 V input
Efficiency
90 %

Description

The Phoenix 12/800 supplies 650 W at 25 °C and 560 W at 40 °C, with a 1500 W peak. This level covers chargers, a light desktop computer or a small tool, but not a heater, a hob or a kettle.

Its input current is more moderate than the 12/1200's: at 650 W and 90% efficiency, you can estimate around 60 A at 12 V (calculated order of magnitude, not a manufacturer value). This is a current that short, thick cables handle more easily than 90 A.

It shares with its neighbour the 9.2 to 17 V input range and the VE.Direct port. In a poorly ventilated locker, it is the 40 °C value that counts.

Choose it if your 230 V uses remain light; move up to the 12/1200 if you approach 650 W continuous.

Who it is for

  • Vans or boats with chargers and small occasional 230 V devices
  • Installations with a 100 Ah battery, where you do not want to draw too much current
  • Users looking for a pure sine inverter for reduced 230 V use

Strengths and points to watch

Strengths

  • Pure sine wave stated by the manufacturer
  • Maximum efficiency stated: 90% (12 V)
  • Continuous power stated: 650 W at 25 °C, 560 W at 40 °C
  • VE.Direct port according to the datasheet

Points to watch

  • Continuous power limited to 560 W at 40 °C according to the datasheet
  • Very high input currents on the 12 V side: short, thick cables and a suitable fuse
  • An inverter also consumes power at idle: factor this into the energy budget
  • High-power appliances (heaters, hobs, kettles) can exceed the stated limits

These points draw on the manufacturer's specifications and documentation. Solanomad does not test equipment.

Full specifications

Specifications of Victron Energy Phoenix Inverter 12/800 VE.Direct
Output power650 W
Peak power1,500 W
Outputs230 V 50 Hz output ; 800 VA nominal, 650 W at 25 °C (560 W at 40 °C) ; 9.2-17 V input
Efficiency90 %

Values published by the manufacturer (see the sources), checked on 21 November 2026. A missing specification was not found on the official data sheet.

Compatibility

  • 12 V battery able to supply the input current: see the battery's datasheet and the inverter's
  • Input range 9.2 to 17 V according to the datasheet

Installation and safety

  • Any 230 V connection and any high 12 V current: leave to a professional
  • Fuse, isolator and cable cross-section are to be calculated from the official manual
  • No compliance or safety guarantee is claimed here

Please note. This page guarantees neither the safety nor the compliance of the product or of its installation. For 230 V, high currents or a fixed installation in a vehicle, call a professional and follow the manufacturer's instructions.

Frequently asked questions

Can I install the inverter myself?

230 V and high currents require electrical skills: the site recommends calling in a professional.

How much power can I really draw?

The datasheet states 650 W at 25 °C and 560 W at 40 °C continuous; the value depends on temperature.

Comparable products

See the full comparison: inverters

Read before you buy

Sources

Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now. This changes neither the specifications shown nor their order. Learn more.

Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now: no commission is linked to your clicks here. Learn more.