Victron Energy Phoenix Inverter 12/1200 VE.Direct, product view

12/24 V to 230 V inverter · Van

Victron Energy

Phoenix Inverter 12/1200 VE.Direct

A 1200 VA Phoenix inverter, 1000 W continuous at 25 °C (850 W at 40 °C), 2200 W peak and 91% efficiency. It is aimed at vans that want a little headroom for small appliances.

This version of the site contains no partner or merchant links for now.

In brief

Output power
1,000 W
Peak power
2,200 W
Outputs
230 V 50 Hz output ; 1200 VA nominal, 1000 W at 25 °C (850 W at 40 °C) ; 9.2-17 V input
Efficiency
91 %

Description

The 12/1200 offers 350 W more continuous power than the 12/800 at 25 °C (1000 W against 650 W) and 290 W more at 40 °C (850 W against 560 W). Its 2200 W peak helps start more demanding loads.

In return, the input current rises: at 1000 W and 91% efficiency, you can estimate about 90 A at 12 V (calculated order of magnitude). Cables, fuse and battery must be sized for this level, and the battery must be able to supply it.

Same 9.2 to 17 V input range, same VE.Direct port, same stated pure sine wave. Maximum efficiency rises to 91%.

It makes sense if your needs regularly exceed 600 W or if you want headroom in hot conditions. Otherwise, the 12/800 avoids oversizing the wiring.

Who it is for

  • Vans with lithium able to supply high currents
  • Occasional need for small appliances or tools up to about 850 W
  • Users who want power headroom for starting certain devices

Strengths and points to watch

Strengths

  • Pure sine wave stated by the manufacturer
  • Maximum efficiency stated: 91% (12 V)
  • Continuous power stated: 1000 W at 25 °C, 850 W at 40 °C
  • VE.Direct port according to the datasheet

Points to watch

  • Continuous power limited to 850 W at 40 °C according to the datasheet
  • Very high input currents on the 12 V side: short, thick cables and a suitable fuse
  • An inverter also consumes power at idle: factor this into the energy budget
  • High-power appliances (heaters, hobs, kettles) can exceed the stated limits

These points draw on the manufacturer's specifications and documentation. Solanomad does not test equipment.

Full specifications

Specifications of Victron Energy Phoenix Inverter 12/1200 VE.Direct
Output power1,000 W
Peak power2,200 W
Outputs230 V 50 Hz output ; 1200 VA nominal, 1000 W at 25 °C (850 W at 40 °C) ; 9.2-17 V input
Efficiency91 %

Values published by the manufacturer (see the sources), checked on 21 November 2026. A missing specification was not found on the official data sheet.

Compatibility

  • 12 V battery able to supply the input current: see the battery's datasheet and the inverter's
  • Input range 9.2 to 17 V according to the datasheet

Installation and safety

  • Any 230 V connection and any high 12 V current: leave to a professional
  • Fuse, isolator and cable cross-section are to be calculated from the official manual
  • No compliance or safety guarantee is claimed here

Please note. This page guarantees neither the safety nor the compliance of the product or of its installation. For 230 V, high currents or a fixed installation in a vehicle, call a professional and follow the manufacturer's instructions.

Frequently asked questions

Can I install the inverter myself?

230 V and high currents require electrical skills: the site recommends calling in a professional.

How much power can I really draw?

The datasheet states 1000 W at 25 °C and 850 W at 40 °C continuous; the value depends on temperature.

Comparable products

See the full comparison: inverters

Read before you buy

Sources

Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now. This changes neither the specifications shown nor their order. Learn more.

Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now: no commission is linked to your clicks here. Learn more.