Please note: these are French rules
This guide describes the rules in force in France (VASP approval, DREAL, French insurers, the contrôle technique). The rules of another country may differ, sometimes considerably. If you live or travel elsewhere, find out locally from the competent authorities and from your insurer. We have not written any rules for other countries.
The short answer
Adding solar panels does not exempt you from asking about the vehicle's status. According to the insurers consulted, a van that receives a fixed conversion (bed, kitchen, electrical or gas installation connected to the vehicle) must be approved as a "VASP caravane" to count as a motorhome for the registration document, the roadworthiness test and insurance.
This page is general information, not legal advice. For your own case, ask the DREAL (the French regional vehicle authority), a test centre and your insurer. It goes deeper than the regulations guide without repeating it.
The framework in a few lines
VASP stands for véhicule automoteur spécialisé (specialised motor vehicle). For a converted van, the entry "VASP caravane" appears on the registration document. Groupama states that a new motorhome generally already has it, and that a van converted by its owner must go through an approval procedure. Matmut specifies that a simple conversion, mobile and removable in about two hours, with no gas and no structural change, is treated as a load.
Conversely, Matmut states that approval is required for fixed elements (table, beds, kitchen, storage) or for a gas or electrical installation connected to the vehicle. A fixed solar installation connected to the vehicle falls into this grey area: check with the competent bodies, because none of the pages consulted deals specifically with solar panels.
Both insurers consulted insist on one point: the registration document must reflect the reality of the vehicle. Groupama warns that if the declared document does not match the vehicle, the insurer may refuse to pay out after a claim, citing a fraudulent declaration. This is the main reason to find out before fitting, not after.
What it changes depending on your situation
The table summarises the points noted in the insurers' pages. It does not replace the official texts.
| Situation | Roadworthiness test | Insurance |
|---|---|---|
| Removable conversion, vehicle still a van or a car | tested as a van or a car; the conversion is treated as a load | standard car policy; tell the insurer about the conversion (Matmut) |
| Fixed conversion without VASP approval | according to Matmut, systematic refusal since 2018; centres may refuse (Groupama) | risk of refusal to pay out after a claim (Groupama, Matmut) |
| Vehicle approved as VASP caravane | tested as a motorhome | motorhome policy, more protective according to Matmut |
The documents of an approval
Groupama lists the documents in a VASP approval file. They depend on your vehicle; the list below is an overview.
- RTI form (basic form) and descriptive notice of the base vehicle.
- Manufacturer's authorisation for certain modifications.
- Dimensioned plan of the conversion and load distribution plan.
- Certificate of conformity from a body (Qualigaz or Veritas, according to Groupama) if you did the conversion yourself.
- File submitted to the DREAL, then online update of the registration document once approved.
Questions to ask before buying or fitting
The following questions avoid unpleasant surprises. Note the answers in writing, with the name of the person and the date.
- To the DREAL or an approval body: does my conversion require VASP approval, and must my solar installation appear in the file?
- To my insurer: does my policy cover the added electrical installation, and must I declare the power of the panels and the battery?
- To a roadworthiness test centre: what is checked on a converted vehicle, and what happens if the equipment is removable?
- To the installer: can I have a detailed invoice, a wiring diagram and the references of the fuses and cables?
Electrical installation: the role of a professional
A solar installation works on direct current, with fuses, cables to be sized and a charge controller; it sometimes includes a 230 V inverter. Neither the insurers consulted nor this page validates the safety of an installation. A professional can provide an invoice, a photo of the installation and a diagram, all useful documents in the event of a claim or an approval file. The wiring and fuse rules are detailed in the regulations and safety guide.
Before drilling the roof
Tell your insurer about the installation, stating the power of the panels and the type of battery. Keep the invoice and the datasheets. If you sell, a tidy file makes the sale easier, while the absence of the VASP entry on the registration document of a converted van can complicate it (Matmut). Also check the weight added: a technical or weight change may require the manufacturer's authorisation.
If you buy a van that is already converted, open the registration document and look for the entry "VASP caravane" (field J.1 according to one of the pages consulted). Ask for the invoices for the electrical and solar installation, the diagram and the component datasheets. An installation with no paper trail is hard to have inspected, insured and resold.
If the VASP entry is missing although the conversion is fixed, you may end up with a vehicle that does not pass the roadworthiness test. Negotiate accordingly or walk away, and seek advice from an approval professional: the procedures take time and depend on the vehicle's configuration.
Panels also change the vehicle's dimensions: measure the final height, especially for car parks with barriers, and check the roof load permitted by the manufacturer. Finally, an older installation must be inspected by a professional before use: heated cables, oxidised lugs, missing or oversized fuses.
What this page does not say
The precise texts (orders, dates, frequency of the test) change over time. The insurers' pages consulted are summaries and may be out of date. For an authoritative answer, contact the DREAL of your region, an approved test centre and your insurer. The rules described are those of France: abroad, they may differ.
Sources
- Groupama, VASP approval: definition and operation
- Matmut, converted vans: the legislation
- Victron Energy, Wiring Unlimited: DC wiring
Safety. This guide is for information only and replaces neither the manufacturer's instructions nor a professional's advice. For 230 V, high currents and any fixed installation, call a qualified professional.