Victron Energy SmartSolar MPPT 150/35, product view

Charge controller · Van

Victron Energy

SmartSolar MPPT 150/35

A SmartSolar chosen for its 150 V input voltage (145 V in operation) rather than for its 35 A current. It allows longer strings of panels and accepts 12, 24 and 48 V batteries.

This version of the site contains no partner or merchant links for now.

In brief

Weight
1.25 kg
Max. solar input
500 W
Outputs
Charge current 35 A ; 12/24/48 V battery auto-detected (36 V via software) ; built-in Bluetooth ; VE.Direct
Open-circuit voltage (Voc)
150 V
Short-circuit current (Isc)
40 A
Dimensions
130 x 186 x 70 (h x l x p) mm

Description

This controller stands out for its maximum PV voltage of 150 V, against 75 V or 100 V for the other three: five 190 W BlueSolar panels in series give about 127.5 V open-circuit for 950 W, which works on a 24 V battery (1000 W stated), whereas no 100 V model would allow it. The 145 V limit at start-up calls for a calculation for cold weather.

At 12 V, its stated nominal PV power is 500 W, against 700 W for the 100/50. The choice is therefore not made on 12 V power but on the wiring structure: longer series, lower PV current. It automatically recognises 12, 24 and 48 V (36 V via software).

The stated PV short-circuit current is 40 A, the charging current 35 A and the weight 1.25 kg for 130 x 186 x 70 mm, like the 100/50. It has no load output.

It suits long roofs, 24 or 48 V setups and projects that may move to a higher battery voltage.

Who it is for

  • 24 V or 48 V installations with several panels in series
  • Long roofs where PV wiring must stay simple
  • Projects that may move to a higher battery voltage

Strengths and points to watch

Strengths

  • Maximum efficiency stated: 98%
  • Built-in Bluetooth and VictronConnect app according to the datasheet
  • Nominal PV power stated: 500 W at 12 V, 1000 W at 24 V

Points to watch

  • Maximum PV voltage: 150 V: calculate the open-circuit voltage of your panels in series, in cold weather, before buying
  • This model has no load output according to the datasheet.
  • Does not replace battery protection: fuses and cables are still needed

These points draw on the manufacturer's specifications and documentation. Solanomad does not test equipment.

Full specifications

Specifications of Victron Energy SmartSolar MPPT 150/35
Weight1.25 kg
Max. solar input500 W
OutputsCharge current 35 A ; 12/24/48 V battery auto-detected (36 V via software) ; built-in Bluetooth ; VE.Direct
Open-circuit voltage (Voc)150 V
Short-circuit current (Isc)40 A
Dimensions130 x 186 x 70 (h x l x p) mm
Efficiency98 %

Values published by the manufacturer (see the sources), checked on 21 November 2026. A missing specification was not found on the official data sheet.

Compatibility

  • Victron BlueSolar panels from the site: compare their open-circuit voltage (24.8 V and 25.5 V) with the maximum PV voltage above
  • Victron Lithium Smart batteries: charge settings in VictronConnect

Installation and safety

  • PV wiring, battery-side fuses and cable cross-sections: have them validated by a professional if you are not experienced
  • A connected panel produces current as soon as there is light: follow the connection order in the manual
  • No compliance is claimed here; refer to the manufacturer's datasheet

Please note. This page guarantees neither the safety nor the compliance of the product or of its installation. For 230 V, high currents or a fixed installation in a vehicle, call a professional and follow the manufacturer's instructions.

Frequently asked questions

How many panels can I connect?

That depends on the voltage and current of your panels: respect the maximum PV voltage of 150 V and the stated power (500 W at 12 V, 1000 W at 24 V). Check the official datasheet.

Is Bluetooth enough to set everything?

The datasheet states setup via the VictronConnect app; consult the manual for the exact list of parameters.

Comparable products

See the full comparison: charge controllers

Read before you buy

Sources

Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now. This changes neither the specifications shown nor their order. Learn more.

Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now: no commission is linked to your clicks here. Learn more.