
Charge controller · Van, Car
EPEVERTracer 4210AN
The Tracer 4210AN is the most powerful Tracer AN in the selection: 40 A, 520 W at 12 V, LCD screen and RS485.
This version of the site contains no partner or merchant links for now.
In brief
- Weight
- 1.65 kg
- Max. solar input
- 520 W
- Outputs
- Charge current 40 A ; 12/24 V battery auto-detected ; load output 40 A ; LCD screen ; RS485 (Modbus) ; IP30 rating
- Open-circuit voltage (Voc)
- 100 V
- Dimensions
- 252 x 180 x 63 mm
- Efficiency
- 98 %
Description
With 40 A and 520 W at 12 V, it supports a more ambitious installation (three or four panels). Its weight of 1.65 kg calls for a solid mounting.
MPPT tracking efficiency is stated at over 99.5% and conversion up to 98%. Lead-acid and lithium support, automatic detection of 12/24 V batteries, an LCD screen and an RS485 interface (Modbus) are stated.
The case measures 252 x 180 x 63 mm, weighs 1.65 kg and is rated IP30: it must stay under cover, inside the vehicle or building, with room for ventilation. PV voltage is limited to 100 V (92 V at 25 °C according to the datasheet).
Who it is for
- Large vans or fixed installations
- Four panels or more
- RS485 monitoring
Strengths and points to watch
Strengths
- 40 A charging, 520 W max at 12 V stated
- LCD screen and RS485 (Modbus)
- Tracking efficiency of over 99.5% stated
Points to watch
- IP30: indoor use only
- Max PV voltage 100 V (92 V at 25 °C)
- Max PV power of 520 W at 12 V
These points draw on the manufacturer's specifications and documentation. Solanomad does not test equipment.
Full specifications
| Weight | 1.65 kg |
|---|---|
| Max. solar input | 520 W |
| Outputs | Charge current 40 A ; 12/24 V battery auto-detected ; load output 40 A ; LCD screen ; RS485 (Modbus) ; IP30 rating |
| Open-circuit voltage (Voc) | 100 V |
| Dimensions | 252 x 180 x 63 mm |
| Efficiency | 98 % |
Values published by the manufacturer (see the sources), checked on 21 November 2026. A missing specification was not found on the official data sheet.
Compatibility
- 520 W max at 12 V: allow for fuses and cables of the right cross-section for 40 A
Installation and safety
- A charge controller is mounted inside the vehicle, close to the battery, with a protective fuse on both the battery side and the panel side.
- Panel wiring and high currents: have cable sizes and protections checked by a professional.
Please note. This page guarantees neither the safety nor the compliance of the product or of its installation. For 230 V, high currents or a fixed installation in a vehicle, call a professional and follow the manufacturer's instructions.
Frequently asked questions
Is it suitable for a lithium battery?
The datasheet states support for lead-acid and lithium; set the profile that matches your battery.
Comparable products


Read before you buy
Sources
- https://www.epever.com/wp-content/uploads/2021/05/EPEVER-Datasheet-tracer-an10A-4OA.pdf
- https://www.epever.com/download/tracer-an-series-1040a/
Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now. This changes neither the specifications shown nor their order. Learn more.