

Rigid solar panel · Van, Car
OffgridtecOLP 150 W V2 (shingle PERC technology)
The OLP 150 W V2 relies on shingle technology: 1195 x 670 mm, a high current of 7.74 A and a low voltage, for a module that is shorter but wider than the MONO 150 W.
This version of the site contains no partner or merchant links for now.
In brief
- Weight
- 9.8 kg
- Outputs
- 0.9 m cable with MC4 connectors
- Panel power
- 150 Wc
- Open-circuit voltage (Voc)
- 22.9 V
- Short-circuit current (Isc)
- 8.2 A
- Cells
- Monocrystalline PERC, shingled technology (3 x 34 cells)
Description
The cells of a shingle module overlap like roof tiles. This model states a 3 x 34 cell layout in monocrystalline PERC, with a cell efficiency of over 22.68%, the highest of our rigid Offgridtec modules.
Its dimensions are 1195 x 670 x 35 mm for 9.8 kg. At 150 W like the MONO 150 W V2 (1350 x 590), it takes up roughly the same surface (about 0.8 m²) but with a length reduced by 155 mm: it fits better on a short roof, at the cost of 0.9 kg extra and 80 mm more width.
Electrically, the datasheet gives Voc 22.9 V, Vmp 19.4 V, Isc 8.2 A and Imp 7.74 A: a low voltage and a high current. This suits controllers with a limited input, but requires wiring of a good cross-section to the controller. The stated cable is 0.9 m long with MC4 connectors.
Who it is for
- Short but wide roofs where the standard 150 W will not fit
- Controllers with a low-voltage input
- Users drawn to shingle technology
Strengths and points to watch
Strengths
- Cell efficiency stated: over 22.68%
- Shingle technology stated
- Length of 1195 mm
- 0.9 m MC4 cable stated
Points to watch
- Stated weight: 9.8 kg
- Isc of 8.2 A: cable cross-section needs care
- Width of 670 mm
These points draw on the manufacturer's specifications and documentation. Solanomad does not test equipment.
Full specifications
| Weight | 9.8 kg |
|---|---|
| Outputs | 0.9 m cable with MC4 connectors |
| Panel power | 150 Wc |
| Open-circuit voltage (Voc) | 22.9 V |
| Short-circuit current (Isc) | 8.2 A |
| Cells | Monocrystalline PERC, shingled technology (3 x 34 cells) |
| Dimensions | 1195 x 670 x 35 mm |
| Efficiency | 22.7 % |
Values published by the manufacturer (see the sources), checked on 21 November 2026. A missing specification was not found on the official data sheet.
Calculated values
| W per kg | 15.3 W/kg |
|---|---|
| W per m² | 187 W/m² |
Calculated by Solanomad from the values above, without real-world testing.
Compatibility
- Voc 22.9 V / Isc 8.2 A: to be checked against your controller's input; higher current than on the other 150 W panels.
Installation and safety
- The short-circuit current (8.2 A) calls for a suitable fuse and cable cross-section: have them validated by a professional.
- Check compatibility with your controller before connecting.
Please note. This page guarantees neither the safety nor the compliance of the product or of its installation. For 230 V, high currents or a fixed installation in a vehicle, call a professional and follow the manufacturer's instructions.
Frequently asked questions
What is the advantage over the MONO 150 W?
The shape: shorter (1195 mm) but wider (670 mm). The two modules have the same power and a similar surface area.
Is it right for your needs?
Enter your appliances, your city and the month: the calculator compares your consumption with the capacity or power of this product, with the formulas shown.
Calculate for this productComparable products



Read before you buy
Sources
Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now. This changes neither the specifications shown nor their order. Learn more.