
Battery · Van, Car
LiTime12V 100Ah Group 24
The LiTime 12V 100Ah Group 24 is a 1280 Wh LiFePO4 battery weighing 9.53 kg, with a 100 A BMS and an IP65 rating.
This version of the site contains no partner or merchant links for now.
In brief
- Capacity
- 1,280 Wh
- Output power
- 1,280 W
- Chemistry
- LiFePO4
- Charge cycles
- 4,000
- Weight
- 9.53 kg
- Outputs
- 12.8 V, 100 Ah, 1280 Wh ; BMS 100 A ; continuous charge/discharge 100 A (280 A 5 s) ; M8 terminals ; expandable up to 4P4S ; recommended charge 20 A
Description
Group 24 format (260 x 168 x 209 mm): it fits standard battery compartments. The manufacturer states 4000 cycles at 100% DOD and 6000 at 80%.
The continuous charge and discharge current is 100 A (280 A for 5 s). The recommended charge is 20 A and it can be expanded up to 4P4S according to the datasheet.
Charging is only permitted between 0 and 50 °C: keep an eye on this in winter.
Who it is for
- Vans or boats needing 12 V
- Replacing a lead-acid battery
- Small solar systems
Strengths and points to watch
Strengths
- 1280 Wh for 9.53 kg
- 4000 cycles at 100% DOD stated
- IP65
- Expandable up to 4P4S
Points to watch
- Charging not permitted below 0 °C or above 50 °C
- No Bluetooth on this version
These points draw on the manufacturer's specifications and documentation. Solanomad does not test equipment.
Full specifications
| Capacity | 1,280 Wh |
|---|---|
| Output power | 1,280 W |
| Chemistry | LiFePO4 |
| Charge cycles | 4,000 |
| Weight | 9.53 kg |
| Outputs | 12.8 V, 100 Ah, 1280 Wh ; BMS 100 A ; continuous charge/discharge 100 A (280 A 5 s) ; M8 terminals ; expandable up to 4P4S ; recommended charge 20 A |
| Dimensions | 260 x 168 x 209 mm |
| Ingress protection | IP65 |
Values published by the manufacturer (see the sources), checked on 21 November 2026. A missing specification was not found on the official data sheet.
Calculated values
| Wh per kg | 134.3 Wh/kg |
|---|---|
| W per kg | 134.3 W/kg |
Calculated by Solanomad from the values above, without real-world testing.
Compatibility
- Recommended charge 20 A: choose a suitable charger
Installation and safety
- A battery is mounted close to the loads with a suitable fuse, cables of adequate cross-section and protections. A current of 100 A is considerable: have the installation done by a professional.
- Observe the charging temperature ranges given by the manufacturer.
Please note. This page guarantees neither the safety nor the compliance of the product or of its installation. For 230 V, high currents or a fixed installation in a vehicle, call a professional and follow the manufacturer's instructions.
Frequently asked questions
Can it be connected in parallel?
Yes according to the datasheet, up to 4 in parallel and 4 in series (4P4S).
Is it right for your needs?
Enter your appliances, your city and the month: the calculator compares your consumption with the capacity or power of this product, with the formulas shown.
Calculate for this productComparable products

Read before you buy
Sources
Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now. This changes neither the specifications shown nor their order. Learn more.