Charge controller · Van, Car

Votronic

MPPT 260 CI (art. 1718)

The Votronic MPPT 260 CI accepts modules of 40 to 260 Wp and delivers up to 18.5 A, in the same compact case as the 170 CI.

This version of the site contains no partner or merchant links for now.

In brief

Weight
0.23 kg
Outputs
12 V battery ; modules 40-260 Wp ; max charging current 18.5 A (leisure battery) / 1 A (starter battery) ; CI bus ; output for AES fridge
Open-circuit voltage (Voc)
60 V
Short-circuit current (Isc)
15 A
Dimensions
77 x 131 x 40 mm

Description

It keeps the 170 CI's format (235 g) but goes up to 260 Wp and 18.5 A: for one or two more powerful panels.

The controller supports lead-acid and LiFePO4 programmes (including heated batteries) according to the brochure, with a CI bus to communicate with other Votronic components. A dedicated output can maintain the starter battery (1 A) and there is an output for an AES fridge.

Weight is 0.235 kg, dimensions 77 x 131 x 40 mm, maximum module voltage 60 V. Stated module power ranges from 40 to 260 Wp.

Who it is for

  • Motorhomes with one or two 130-260 Wp panels
  • Complete Votronic installations
  • Limited space in the technical locker

Strengths and points to watch

Strengths

  • Modules of 40 to 260 Wp
  • Module voltage up to 60 V
  • Lead-acid and LiFePO4 programmes according to the brochure
  • Starter battery maintenance output

Points to watch

  • Module power limited to 260 Wp
  • Maximum charging current 18.5 A to the leisure battery

These points draw on the manufacturer's specifications and documentation. Solanomad does not test equipment.

Full specifications

Specifications of Votronic MPPT 260 CI (art. 1718)
Weight0.23 kg
Outputs12 V battery ; modules 40-260 Wp ; max charging current 18.5 A (leisure battery) / 1 A (starter battery) ; CI bus ; output for AES fridge
Open-circuit voltage (Voc)60 V
Short-circuit current (Isc)15 A
Dimensions77 x 131 x 40 mm

Values published by the manufacturer (see the sources), checked on 21 November 2026. A missing specification was not found on the official data sheet.

Compatibility

  • Open-circuit voltage of panels in series to be kept below 60 V

Installation and safety

  • A charge controller is mounted inside the vehicle, close to the battery, with a protective fuse on both the battery side and the panel side.
  • Panel wiring and high currents: have cable sizes and protections checked by a professional.

Please note. This page guarantees neither the safety nor the compliance of the product or of its installation. For 230 V, high currents or a fixed installation in a vehicle, call a professional and follow the manufacturer's instructions.

Frequently asked questions

How does it differ from the 170 CI?

Same 77 x 131 x 40 mm case; the 260 CI accepts 260 Wp against 170 Wp and delivers 18.5 A against 13 A.

Comparable products

See the full comparison: charge controllers

Read before you buy

Sources

Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now. This changes neither the specifications shown nor their order. Learn more.

Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now: no commission is linked to your clicks here. Learn more.