Charge controller · Van, Car

Votronic

MPPT 170 CI (art. 1713)

The Votronic MPPT 170 CI is a compact (225 g) 13 A controller for modules of 40 to 170 Wp, with a secondary output for the starter battery.

This version of the site contains no partner or merchant links for now.

In brief

Weight
0.23 kg
Outputs
12 V battery ; modules 40-170 Wp ; max charging current 13 A (leisure battery) / 1 A (starter battery) ; CI bus ; output for AES fridge
Open-circuit voltage (Voc)
60 V
Short-circuit current (Isc)
10 A
Dimensions
77 x 131 x 40 mm

Description

Compact and light, it targets small installations: one panel of up to 170 Wp for a motorhome or a small van.

The controller supports lead-acid and LiFePO4 programmes (including heated batteries) according to the brochure, with a CI bus to communicate with other Votronic components. A dedicated output can maintain the starter battery (1 A) and there is an output for an AES fridge.

Weight is 0.225 kg, dimensions 77 x 131 x 40 mm, maximum module voltage 60 V. Stated module power ranges from 40 to 170 Wp.

Who it is for

  • Motorhomes or small vans with a single panel
  • Votronic installations (CI bus)
  • Needing to maintain the starter battery

Strengths and points to watch

Strengths

  • Modules of 40 to 170 Wp
  • Module voltage up to 60 V
  • Lead-acid and LiFePO4 programmes according to the brochure
  • Starter battery maintenance output

Points to watch

  • Module power limited to 170 Wp
  • Maximum charging current 13 A to the leisure battery

These points draw on the manufacturer's specifications and documentation. Solanomad does not test equipment.

Full specifications

Specifications of Votronic MPPT 170 CI (art. 1713)
Weight0.23 kg
Outputs12 V battery ; modules 40-170 Wp ; max charging current 13 A (leisure battery) / 1 A (starter battery) ; CI bus ; output for AES fridge
Open-circuit voltage (Voc)60 V
Short-circuit current (Isc)10 A
Dimensions77 x 131 x 40 mm

Values published by the manufacturer (see the sources), checked on 21 November 2026. A missing specification was not found on the official data sheet.

Compatibility

  • Open-circuit voltage of panels in series to be kept below 60 V

Installation and safety

  • A charge controller is mounted inside the vehicle, close to the battery, with a protective fuse on both the battery side and the panel side.
  • Panel wiring and high currents: have cable sizes and protections checked by a professional.

Please note. This page guarantees neither the safety nor the compliance of the product or of its installation. For 230 V, high currents or a fixed installation in a vehicle, call a professional and follow the manufacturer's instructions.

Frequently asked questions

Can I connect the starter battery to it?

Yes according to the brochure: a dedicated output limited to 1 A is provided for maintaining it.

Comparable products

See the full comparison: charge controllers

Read before you buy

Sources

Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now. This changes neither the specifications shown nor their order. Learn more.

Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now: no commission is linked to your clicks here. Learn more.