Charge controller · Van, Car
Victron EnergySmartSolar MPPT 100/20
The SmartSolar 100/20 is a 20 A MPPT controller with a maximum PV voltage of 100 V and built-in Bluetooth. It detects 12, 24 or 48 V by itself.
This version of the site contains no partner or merchant links for now.
In brief
- Weight
- 0.65 kg
- Max. solar input
- 290 W
- Outputs
- Charge current 20 A ; 12/24/48 V battery auto-detected ; load output 20 A ; built-in Bluetooth ; VE.Direct
- Open-circuit voltage (Voc)
- 100 V
- Short-circuit current (Isc)
- 20 A
- Dimensions
- 100 x 131 x 60 (h x l x p) mm
Description
This small 0.65 kg unit suits installations of 290 W at 12 V (580 W at 24 V) according to the datasheet, with a stated maximum efficiency of 98%.
Built-in Bluetooth and the VictronConnect app let you monitor production, adjust settings and update without a screen. The VE.Direct port lets you connect it to a Victron display or monitor.
Its maximum input voltage (100 V) allows strings of panels in series, which are cheaper in cabling.
Who it is for
- Motorhomes or vans with one or two 200-300 W panels
- Enthusiasts who want to track their data from a phone
- Installations that may grow to 24 or 48 V
Strengths and points to watch
Strengths
- 98% maximum efficiency stated
- Built-in Bluetooth, VictronConnect
- Automatic 12/24/48 V
- Weight of 0.65 kg
Points to watch
- Only 290 W at 12 V
- Max PV voltage 100 V: allow for the voltage in cold weather
- No screen (use via the app)
These points draw on the manufacturer's specifications and documentation. Solanomad does not test equipment.
Full specifications
| Weight | 0.65 kg |
|---|---|
| Max. solar input | 290 W |
| Outputs | Charge current 20 A ; 12/24/48 V battery auto-detected ; load output 20 A ; built-in Bluetooth ; VE.Direct |
| Open-circuit voltage (Voc) | 100 V |
| Short-circuit current (Isc) | 20 A |
| Dimensions | 100 x 131 x 60 (h x l x p) mm |
| Efficiency | 98 % |
Values published by the manufacturer (see the sources), checked on 21 November 2026. A missing specification was not found on the official data sheet.
Compatibility
- Max open-circuit voltage 100 V; 20 A charge: check that your panel array stays within the limits at 12 V (290 W)
Installation and safety
- A charge controller is mounted inside the vehicle, close to the battery, with a protective fuse on both the battery side and the panel side.
- Panel wiring and high currents: have cable sizes and protections checked by a professional.
Please note. This page guarantees neither the safety nor the compliance of the product or of its installation. For 230 V, high currents or a fixed installation in a vehicle, call a professional and follow the manufacturer's instructions.
Frequently asked questions
What panel power suits this controller?
The datasheet states 290 W at 12 V and 580 W at 24 V, subject to the maximum charging voltage and current.
Comparable products


Read before you buy
Sources
- https://www.victronenergy.com/solar-charge-controllers/smartsolar-mppt-75-10-75-15-100-15-100-20
- https://www.victronenergy.com/upload/documents/Datasheet-SmartSolar-charge-controller-MPPT-75-10,-75-15,-100-15,-100-20_48V-EN.pdf
Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now. This changes neither the specifications shown nor their order. Learn more.