

Battery monitor (shunt) · Van, Car, No vehicle
Victron EnergyBMV-712 Smart
The BMV-712 Smart adds to Victron's measurement a flush-mounted display, an audible and visual alarm and a programmable 60 V / 1 A relay.
This version of the site contains no partner or merchant links for now.
In brief
- Connection and functions
- Supply voltage 6.5-70 V ; shunt 500 A / 50 mV ; Bluetooth ; VE.Direct ; latching relay 60 V / 1 A ; audible and visual alarm ; current accuracy ±0.4 %
- Ingress protection
- IP55 (not intended for outdoor use)
- Dimensions
- Front face 63 mm in diameter (69 x 69 frame) ; body 52 x 31 deep mm
Description
It measures like the SmartShunt (±0.4%, 500 A / 50 mV shunt, 6.5-70 V supply) but adds a 63 mm diameter screen on its front (69 x 69 mm frame) for permanent reading.
The bistable relay can trigger an alarm or cut a load according to a threshold. The VictronConnect app remains available via built-in Bluetooth.
It is rated IP55, but not intended for outdoor use: mount it inside the cabin, flush in a panel.
Who it is for
- Motorhome or boat dashboards
- Users who want to see their state of charge at a glance
- Needing an alarm or programmable relay
Strengths and points to watch
Strengths
- Display and audible and visual alarm
- 60 V / 1 A relay
- Built-in Bluetooth
Points to watch
- Flush mounting to be planned
- Not intended for outdoor use (IP55)
These points draw on the manufacturer's specifications and documentation. Solanomad does not test equipment.
Full specifications
| Connection and functions | Supply voltage 6.5-70 V ; shunt 500 A / 50 mV ; Bluetooth ; VE.Direct ; latching relay 60 V / 1 A ; audible and visual alarm ; current accuracy ±0.4 % |
|---|---|
| Ingress protection | IP55 (not intended for outdoor use) |
| Dimensions | Front face 63 mm in diameter (69 x 69 frame) ; body 52 x 31 deep mm |
Values published by the manufacturer (see the sources), checked on 21 November 2026. A missing specification was not found on the official data sheet.
Compatibility
- 500 A / 50 mV shunt: to be sized according to the system's maximum current
Installation and safety
- A battery monitor is fitted on the battery's negative: installing high-current cables is a job for a professional.
- Use a suitable fuse on the positive side and observe the shunt's connection direction.
Please note. This page guarantees neither the safety nor the compliance of the product or of its installation. For 230 V, high currents or a fixed installation in a vehicle, call a professional and follow the manufacturer's instructions.
Frequently asked questions
How does it differ from the SmartShunt?
The display, the alarm and the programmable relay. The SmartShunt can only be read through the app.
Comparable products

Read before you buy
Sources
- https://www.victronenergy.com/battery-monitors/bmv-712-smart
- https://www.victronenergy.com/upload/documents/Datasheet-BMV-712-Smart-EN.pdf
Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now. This changes neither the specifications shown nor their order. Learn more.