

Folding solar panel · Car, No vehicle
EcoFlowLightweight portable panel 160 W
A 160 W portable panel weighing 3.8 kg, with N-type TOPCon cells and a stated IP68 rating. An in-between size between the 110 W and the 400 W.
This version of the site contains no partner or merchant links for now.
In brief
- Weight
- 3.8 kg
- Outputs
- Connector XT60I-F
- Panel power
- 160 Wc
- Open-circuit voltage (Voc)
- 21.4 V
- Short-circuit current (Isc)
- 9.2 A
- Cells
- N-type monocrystalline silicon, TOPCon
Description
This 160 W panel weighs 3.8 kg; unfolded it measures 1677 x 598 x 26 mm, folded 609 x 598 x 26 mm. The manufacturer states an efficiency of at least 25% and an IP68 rating.
Open-circuit voltage is 21.4 V, short-circuit current 9.2 A, with an XT60I-F connector. The manufacturer mentions up to 177 W in bifacial conditions (BNPI): this value depends on particular conditions and should not be used as a reference for everyday charging.
The stated warranty is 5 years. At 160 W, it takes up a little more space than a 110 W but remains portable.
Who it is for
- Car or camping with a small to mid-sized power station
- Users who want a light panel
Strengths and points to watch
Strengths
- 3.8 kg
- Stated efficiency of at least 25%
- IP68 stated
- Warranty stated: 5 years
Points to watch
- XT60I-F connector (no MC4)
- The stated bifacial output assumes particular conditions
These points draw on the manufacturer's specifications and documentation. Solanomad does not test equipment.
Full specifications
| Weight | 3.8 kg |
|---|---|
| Outputs | Connector XT60I-F |
| Panel power | 160 Wc |
| Open-circuit voltage (Voc) | 21.4 V |
| Short-circuit current (Isc) | 9.2 A |
| Cells | N-type monocrystalline silicon, TOPCon |
| Dimensions | Unfolded 1677 x 598 x 26 ; folded 609 x 598 x 26 mm |
| Efficiency | 25 % |
| Ingress protection | IP68 |
Values published by the manufacturer (see the sources), checked on 21 November 2026. A missing specification was not found on the official data sheet.
Calculated values
| W per kg | 42.1 W/kg |
|---|---|
| W per m² | 160 W/m² |
Calculated by Solanomad from the values above, without real-world testing.
Compatibility
- Open-circuit voltage 21.4 V, 9.2 A: check the maximum current of your power station's solar input
Installation and safety
- Before connecting, compare the panel's voltage and current with the input range of your power station or charge controller (see the manual).
- A fixed connection on the roof or to a high-current onboard installation should be left to a professional.
- Check the connectors: an adapter is sometimes needed between the panel and the power station.
Please note. This page guarantees neither the safety nor the compliance of the product or of its installation. For 230 V, high currents or a fixed installation in a vehicle, call a professional and follow the manufacturer's instructions.
Frequently asked questions
Which connector does it use?
See the datasheet: XT60 connector (no direct MC4). Depending on your power station or charge controller, an adapter may be needed.
Is it right for your needs?
Enter your appliances, your city and the month: the calculator compares your consumption with the capacity or power of this product, with the formulas shown.
Calculate for this productComparable products



Read before you buy
Sources
Transparency. Solanomad is funded by affiliate marketing, but this version of the site contains no partner or merchant links for now. This changes neither the specifications shown nor their order. Learn more.